Volume + temperature - practice problems
Number of problems found: 37
- Heat energy
Energy is measured using the unit Joule (J). Temperature is measured using the unit degree Celsius °C). To increase the temperature of 1 liter of water by 1°C, 4200 J of heat energy is required. (a) Kelly wants to increase the temperature of 2 liters of w - Liters 83211 We have 160 L of water at 67°C; how many liters of cold water at 18°C are needed to cool it to 39°C?
- KiloJoules energy
In the washing machine, 6 liters of water were heated from a temperature of 22 degrees to 62 degrees. Find out the weight of 6 liters of water. What heat (in kJ= kiloJoules) did the water receive? - Temperature 80864
You have water at a temperature of 10°C and boiling water at a temperature of 100°C. How do you prepare 9 liters of water at a temperature of 30°C?
- Nitrogen gas
In a cylinder with a piston, there is nitrogen N2 with a volume of 5 liters, a temperature of 25 degrees Celsius, and a pressure of 200 kPa. We very slowly compress the gas in the cylinder to half its volume while its temperature does not change. Determin - Fuel efficiency
The gravimetric analysis of an anthracite fuel is 90% carbon, 3% hydrogen, 2% oxygen, and 1% nitrogen. Given that analysis of the dry combustion products by volume is 16.2% CO2, 3.5% O2, and 80.3% N2, during the combustion process of anthracite, which con - Temperature 61484
The air bubble at the bottom of the lake at a depth of h = 21 m has a radius of r1 = 1 cm at a temperature of t1 = 4 °C. The bubble rises slowly to the surface, and its volume increases. Calculate its radius when it reaches the lake's surface, with a temp - There
There is 5 l of water with a temperature of 20°C in the bucket. We add 3 liters of hot water. The resulting temperature will be 30°C. What was the temperature of the hot water? - Heat transfer
We placed a lead object weighing 0.4 kg and 250°C in 0.4 L water. What was the initial temperature of water t2 if the object's temperature and the water after reaching equilibrium was 35°C? We assume that the heat exchange occurred only between the lead o
- Petra Petra likes to bathe in a bathtub with a water temperature of 38 degrees. She turned on the hot water set at 70 degrees and left for a moment. Before she returned, 40 liters of water flowed into the tub. How much water with a temperature of 22 degrees mus
- The aluminum We placed the aluminum object with a weight of 0.80 kg and a temperature of 250°C in the water with a weight of 1.6 kg and a temperature of 23°C. What is the system temperature after reaching equilibrium? We assume that the heat exchange occurred only bet
- The bath The bath has water with a volume of 220 l and a temperature of 65°C. Find the mass m2 of water at 15°C to be poured, so the resulting temperature in the bath will be 40°C. We neglect the heat exchange between water and the environment. Water's
- Radiators
Calculate the radiator output if it has a thermal gradient (difference between inlet water and return temperatures) a) 5°C b) 10°C c) 15°C d) 20°C A heating water volume flow is 45 kg/h. How fast the water flows from the supply pipe to the radiator e) DN1 - Temperature 38971
A zinc body has a volume of 20 dm³. What heat is needed to warm it from a temperature of 25 to 100 degrees Celsius? What is this body's heat capacity C (unit J/K)?
- The bath Dad poured 50 liters of water at 60°C into the tub. How much cold water must he add at 10°C to obtain a bath that has a temperature of 40°C?
- Temperature 37001 The mother prepared half a liter of cold water for the children to drink. It mixed water at 20 °C with 400 ml of cold water at 5 °C. What was the temperature of the prepared drink?
- Temperature 36991 Honza filled 2 liters of hot water at a temperature of 90 °C from a heater into a five-liter container. What temperature must the water that the container fills have a mixture temperature of 42 °C?
- Compressed gas
The pressure vessel contains a compressed gas at a temperature t1 = 27°C and a pressure p1 = 4 MPa. How much does its pressure change when we release half the amount of gas, and its temperature drops to t2 = 15°C? - Copper winding
Calculate the current flowing through the copper winding at an operating temperature of 70°C Celsius if the winding diameter is 1.128 mm and the coiled length is 40 m. The winding is connected to 8V.
We have 520 ml of hot water and 640 ml of water at 48°C. What is the temperature of approximately hot water when the resulting mixture has a temperature of 65°C?Do you have homework that you need help solving? Ask a question, and we will try to solve it. Solving math problems.
