Cylinder practice problems - page 11 of 24
Number of problems found: 480
- The iron roller
The iron roller has a base circumference of 28 π cm. The worker drilled a hole through the top of the roller. After drilling, the given product had a 35% smaller volume than before. The hole's circumference in the base is equal to the height of the roller - Pipes
The water pipe has a cross-section 1903 cm². An hour has passed 859 m³ of water. How much water flows through the pipe with cross-section 300 cm² per 11 hours if water flows at the same speed? - Two cylinders
There are two cylinders, one with oil and one with an empty oil cylinder, with no fixed value assumed infinitely. We are pumping out the oil into an empty cylinder with a radius =1 cm, height=3 cm, rate of pumping oil is 9 cubic centimeters per sec. We ar - Giant coin
From coinage, metal was produced into giant coins and applied so much metal, such as producing 10 million actual coins. What has this giant coin's diameter and thickness if the ratio of diameter to thickness is the same as an actual coin, which has a diam - Vintner
How high can a vintner fill the keg with crushed red grapes if these grapes occupy a volume of 20 percent? The keg is cylindrical with a diameter of the base of 1 m and a volume of 9.42 hl. Start from the premise that says that fermentation will fill the - Winch drum
Originally an empty winch drum with a diameter of 20 cm and a width of 30 cm on the rescue car, he started winding a rope with a thickness of 1 cm from edge to edge. The winch stopped after 80 turns. It remains to spin 3.54m of rope (without hook). How lo - Whitewash 33351
The castle tower room has the shape of a cylinder with a diameter of 4.6m and a height of 2.9m. Calculate how much it will cost to whitewash the ceiling and walls of this room if €23 is paid for 1 square meter, while windows and doors account for 15℅ of t - The coil
How many ropes (a diameter of 8 mm) fit on the coil (threads are wrapped close together)? The coil has the following dimensions: The inner diameter is 400mm. The outside diameter is 800mm. The length of the coil is 470mm. - Concrete pipe
How much will it cost to cover a 6 m long concrete pipe with an outer radius of 1.5 m and an inner radius of 0.8 meters if one m² paint costs 24 €? - Diameter 82212
How many meters of copper wire with a diameter of d=3 mm will be produced from 60 kg of copper scrap if the specific gravity of copper is p=9g/cm³? - Diameter 43971
The lawn at the family house has an area of 3a. The family owns a 1.5 m wide garden roller, which is 1 m in diameter. How many times does the roller turn when rolling the whole lawn? - Cylindrical 30331
Calculate the area of sheet metal needed to make a closed cylindrical vessel with a radius of 2.5 m and a height of 1.2 m if the joints and waste count for 6%. - Axial cut of a rectangle
Calculate the volume and surface of the cylinder whose axial cut is a rectangle 15 cm wide with a diagonal of 25 cm long. - Cylinder-shaped 3009
The municipality collects a fee of CZK 500 for 1 m of square billboard space. How much will he earn if he rents a cylinder-shaped column with a diameter of 2 m and a height of 3 m to stick posters? - Cylindrical magnets
Calculate the magnetic field energy of a cylindrical coil with 400 turns, a length of 0.4 m, and a radius of 20 mm. A current of 3A passes through the coil. (µo = 4π 10-7 H/m) - Two bodies
The rectangle with dimensions 8 cm and 4 cm is rotated 360º first around the longer side to form the first body. Then, we similarly rotate the rectangle around the shorter side b to form a second body. Find the ratio of surfaces of the first and second bo - Insulation
A special rubber pipe protector is used to insulate the supply pipes of solar collectors. The product with the description DNa20, thickness 25 mm, 2 m, corresponds to insulation for pipes with a diameter of 20 mm with a rubber layer thickness of 25 mm, wh - Cylinder 7744
What is the height of the cylinder if the volume is 8,478 cubic meters and the area of the base of the cylinder is 706.5 cm square? - Hectoliters - tank
A cylindrical tank with a base diameter of 1.2 m is supposed to hold 17 hectoliters of water. How many square meters of sheet metal are needed to make it? We calculate if 2% of the surfaces are for joints and waste. - Sheet metal troughs
A farmer orders sheet metal troughs from a tinsmith for loading calves on pasture. The tinsmith looks at a picture of the trough and estimates how much sheet metal he will need for one trough. Determine the sheet metal consumption, add 15% for waste and j
Do you have unsolved math question and you need help? Ask a question, and we will try to solve it. We solve math question.
