The unit conversion of mass problems - page 18 of 19
Number of problems found: 363
- The bridge
A vehicle weighing 5,800 kg passes 41 km/h on an arched bridge with a radius of curvature of 62 m. What force pushes the car onto the bridge as it passes through the center? What maximum speed can it cross over the bridge's center so it does not fly off t
- Equilateral 83322
The glass weight has the shape of a regular four-sided pyramid with a base edge of 10 cm. The shell walls are equilateral triangles. What is the weight in grams of the paperweight if the density of the glass is 2500kg/m³?
- Consumption 15663
The cone-shaped sheet metal roof has a base diameter of 80 cm and a height of 60 cm. If 1 kg of paint is consumed per 6 m² of sheet metal, calculate the paint consumption for painting this roof.
- Angled cyclist turn
The cyclist passes through a curve with a radius of 20 m at 25 km/h. How much angle does it have to bend from the vertical inward to the turn?
- Temperature 7477
The pool with a length of l = 50 m and a width of s = 15 m has a depth of h1 = 1.2 m at the shallowest part of the wall. The depth then gradually increases to a depth of h2 = 1.5 m in the middle of the pool. = 4.5 m walls in the deepest part of the pool.
- Cross-section of iron bar
What is the mass of an iron bar 1.5 m long, the cross-section of which is a rhombus with side a = 45 mm and a corresponding height of 40 mm? Iron density ρ = 7.8 g/cm³? What is the surface of the iron rod?
- Quadrilateral 28491
Calculate the weight of a regular quadrilateral pyramid with a base edge of 4 cm in length and a body height of 6 cm if it is made of a material density of 8 g/cm³.
- Gold wire
From one gram of gold was pulled wire 1.4 km length. What is its diameter if the density of Au is ρ=19.5 g/cm³?
- Reinforcement 42491
The concrete ring (used for reinforcement in wells) has an inner diameter of 800 mm and an outer diameter of 900 mm. It is made of concrete with a density of 2,500 kg/m³. Its height is 1 m. Calculate its mass.
- Mass
The thickness of a metallic tube is 1cm, and its outer radius is 11cm. Find the mass of such a 1m long tube if the metal density is 7.5g per cubic cm.
- Brass sphere
Find the weight of a brass ball with an outer radius of 12 cm and a wall thickness of 20 mm if the brass's density is 8.5 g/cm³.
- Calculate 8891
Calculate the weight of a PVC pipe with an inner diameter d = 45 mm and a length l = 3 m if the wall thickness of the pipe is s = 7.5 mm. The density of PVC is ρ = 1350 kg/m³.
- Iron pole
What is the mass of a pole with the shape of a regular quadrilateral prism with a length of 1 m and a cross-sectional side length of a = 4.5 cm made from iron with density ρ = 7800 kg/m³?
- Horizontal 83148
The bend has a radius of r = 100 m and is inclined at an angle of 20° to the horizontal plane (= tilt angle). What is the safe (the "best") speed to go through this curve? Sketch the picture regarding NIVS, mark the forces, and calculate.
- Costume
Denisa is preparing for a goldsmith's costume carnival. During the preparations, she thought she would let her hair wipe instead - she would apply a 5 μm thick layer of gold to each hair. How much gold would Denisa need? Assume that all hundred thousand D
- Plastic pipe
Calculate the plastic pipe's weight with diameter d = 100 mm and length 330 cm if the wall thickness is 4 mm and the density of plastic is 1346 kg/m³.
- Steel tube
The steel tube has an inner diameter of 4 cm and an outer diameter of 4.8 cm. The density of the steel is 7800 kg/m³. Calculate its length if it weighs 15 kg.
- Cross-section 62964
The owner must cover the carport with a hipped roof with a rectangular cross-section of 8 m x 5 m. All roof surfaces have the same slope of 30°. Determine the price and weight of the roof if 1 m² cost €270 and weighs 43 kg.
- Mass point
Two equal forces of 30 Newtons act on a mass point. Find the magnitude of the resultant force if these forces form an angle of 42°.
Do you have homework that you need help solving? Ask a question, and we will try to solve it. Solving math problems.